Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to design custom board

Status
Not open for further replies.
K

kabaleevisu

Advanced Member level 2
Joined
Apr 14, 2010
Messages
616
Helped
85
Reputation
170
Reaction score
81
Trophy points
1,308
Location
Chennai,India
Activity points
4,512
hi all

i like to design custom board here i attached . is it possible to design board in mechanical symbol or is it possible to import in .dxf file
NOTE:
i have not auto cad to import .dxf file. I LIKE TO DESIGN THE BOARD IN MECHANICAL SYMBOL IS IT POSSIBLE


:x
 

I'm not sure what you are asking, but in general every pcb needs a board outline.
A mechanical part outline is not recognized as a board outline so you need to copy/import the outline.

In this case I would use a DXf file to import the outline into the software. This is the most easy way.

If you do not have a DXF you can place the mechanical part on you'r board and then draw the board outline.

Remember, you are placing parts on a pcb, not a pcb on a part.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top