Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

xbee delay - how to solve

Status
Not open for further replies.
E

elmediel

Junior Member level 3
Joined
Oct 20, 2010
Messages
31
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Location
Mandaluyong, Philippines
Activity points
1,475
hi all,

my xbee is transmitting fine .. but this is the problem

when i send characters in series, the first 6 or 10 characters will be sent instantly.. but the succeeding character will have 3 or 5 or more seconds delay.. this is not good...

i set it coordinator and end point. does anyone knows how to solve this issue?
 

I suggest you to have a look at RO command. It is used to "packetize" data: instead of sending chars as soon as they arrive, the device attempts to send data burst. This may explain the delay. Try to set it to 1.
 

hey,

i tried making the RO = 0 but still it only make it faster by additional 10 characters.. after that.. there is still delay

when i send a series of characters... after 20 chars, it will delay for about 3 to 5 secs...

can anyone help me with this?
 

i got it working!

i just set the DL = SL (other xbee) and DH = SH (other xbee)


this setup is unicast instead of broadcast... =)


thanks to myself and google!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top