Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] How can I do from gds to RC using Cadence QRC tool

Status
Not open for further replies.
S

songzm2008

Newbie level 6
Joined
Nov 9, 2009
Messages
13
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,358
I knew QRC can extract the RC from LEF/DEF,
but if I want to extract the RC from gds,Can you tell the flow for it.

Is it the same as Assura RC extract flow

##must run the lvs ,and then RC extarct by rsf file ?

Thanks!
 

Yes,
In your case - LVS & QRC

QRC supports two independent flows :
1. LVS flow [ Assura / Calibre / PVS ]
2. LEF-DEF [where gds is allowed for stdcells & hard macro, fill etc..] - also if design is in Open-Access, run QRC before you port to GDS or OASIS.

rsf is old - ccl [common command language] is new.
The good thing is - same unified qrcTechFile will work for both LVS flow as well as OA/LEF-DEF.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top