Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to use calibre without any CELL check?

Status
Not open for further replies.
S

sicheng163

Member level 2
Joined
Oct 19, 2009
Messages
45
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Location
Chengdu,China
Activity points
1,567
Hi,all
I have a gds file which don't contain any CEL view, because the foundry won't provide those, so I only got Route view in gds file, still I want to do DRC with calibre, but, calibre will prompt many errors like this:
ERROR: Cell DLY3X4TS is referenced but not defined.
ERROR: Cell DFFSRX1TS is referenced but not defined.
....
ERROR: Cell PFILL1 is referenced but not defined.
*** Calibre finished with Exit Code: 4 ****
Click to expand...
so, anyone can tell me how to bypass those Cell check and only do some metal wire rule check?
thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top