Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

0-30MHZ 10W Power Amplifier

Status
Not open for further replies.
S

seronimo

Newbie level 4
Joined
Jun 27, 2010
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
turkey
Activity points
1,314
How can I design power amplifier that works at 0-30MHz and 10W ? This amplifier is going to use at wireless communication project.
 

seronimo said:
i need much more simple circuits
Click to expand...

for what you want to do the bandwidth you want to cover.... that first link is about as simple as you can get !!! even for a single freq of operation within that range, its almost as simple as it gets

anything less than described and its going to be a very poor transmitter with a dirty (harmonic/spurii) filled output thats gonna make you a lot of enemies on air

Hope you have a licence to transmit on those freqs ???

cheers
Dave
VK2TDN
 

You need to define the lower frequency as 0-30MHz isn't realistic. Do you mean 0.5-30MHz or 2-30MHz etc...?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top