Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Magnetic Bias only be assigned to Ferrite 3D objects

Status
Not open for further replies.
J

JohnnyPlayer

Newbie level 1
Joined
Aug 3, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,289
HFSS: Magnetic Bias only be assigned to Ferrite 3D objects

Hello everyone,
I've tried to simulate the effect of current running through an copper strip in HFSS to investigate the gradient effect on a surrounding static magnetic field.
The problem at hand is to create this magnetic field. So what I've tried so far is the draw a cylinder (3D) made of ferrite and excite this with a magnetic bias as if a permanent magnet. Unfortunate HFSS (ver.12.1) responds with an error message;
Magnetic Bias only be assigned to Ferrite 3D objects

Can anyone help me how to solve the matter.

Thanks in advance

John
 
Last edited:

Re: HFSS: Magnetic Bias only be assigned to Ferrite 3D objects

Are you sure you have set all the gyromagetic properties for the ferrite, e.g, saturation magneticzation, Er, line width....

Looks like the error only happens when you attempt to set the magnetic bias for an un-ferrite material.
 
  • Like
Reactions: nou84

    N

    nou84

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top