Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Who use the HFSS to design E-plane waveguide filter

Status
Not open for further replies.

yykk

Member level 1
Joined
Aug 29, 2003
Messages
39
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Hong Kong
Activity points
279
Hi,

Who have the waveguide filter example ?
if yes, Can u give one for me ???
 

WHAT IS THE PROBLEM WHEN YOU USE THE HFSS to simulatie the E fileter
 

I am also doing a similar simulation. My design works fine when i simulate in ku band. but when i setup a new design for ka band the pass band is not visible. does it has to do with mesh refinement. please comment
 

YOU SHOULD CONFIGURE THE MESH MANUALLY,OR YOU WILL FIND NO PASSBAND.
 

How big is your filter in lambdas ?
How wide is your band pass ?

If it is not big you can use lambda refignment instead of mesh operations.
Set lambda refinment to 0.1 and number of adaptations to 1.

Itai
 

does anyone has the example for this
 

I just have to ask, after you build and test your Ku band filter, does its performance match the ADS prediction, or is it off 30%?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top