Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

VHDL/Verilog Projects - UART Simulation

Status
Not open for further replies.

dchan

Newbie level 3
Joined
Aug 22, 2010
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,303
Hi,
I am an absolute beginner to VHDL and Verilog. I have implemented some minor designs using Modelsim (eg gate-level design for 4bit-8bit signed/unsigned comparator, Booth Encoder etc). I am trying to find a feasible semester project that I can implement in 3 months. I have been somewhat working towards implementing a UART but have no idea about how should I simulate this? Would I need to buy a board? If so, which would be a good and cheap one?

Thank you.
 

Check for 'Spartan 3E Starter Board' on the internet, it's about 120-140$..
It's good to start

I.A
 

Hi,

I have a Spartan 3E board which is good value.

**broken link removed**

If you want to play with a UART check out this post:



scanman
 

Hi All;
There are a number of books that are Good, But one That I just Got and is much HELP, is --- Fpga prototyping by Verilog examples (Xilinx Spartan -3 Version) There is also a Vhdl version of this book, Depending on your preference... By Pong P. Chu.... I am just starting to go thru the book, With my Spartan 3E, and except for the LCD, I can impliment the various programs, the 3E also doesn't have the Alpha neumeric Led, But I can wire then in, so no problem....
THANK YOU Marty
 

I just came across that book as well and am considering buying it along with the board. Thanks a lot everybody!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top