Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

project using pic18, lcd, timer/counter , LCD and other

Status
Not open for further replies.
N

noman87

Newbie level 3
Joined
Aug 22, 2010
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
malaysia
Activity points
1,304
hello,

please help me to design a system using PIC18 microcontroller that base on the current mechatronics product available in the market. my design shuld use interrupt peripheral, whit at least three of the following item:
1) hardware timer/counter
2) analog to digital converter (ADC)
3) LCD
4) relay/valve/ motor control
5) serial protocol communication (UART,SPI, or I2C)

i'm realy need your help
 

What do you have in mind?
 

yes, im really need you help..
In my mind there are three proposed projects that I will do that:
1) Automatic washing machine
2) parking system (count the number of cars and the control gate in and out and show the number of empty parking)
3) air conditioning system

I want to ask your views on my proposals, the proposed project or you have a better and easy to implement. what is important this project must have three conditions that I have attached earlier.
 

I want to ask your views on my proposals,
Click to expand...

it is hard to have a view on a proposal of nothing.

you have to figure out ways to help others help you.
 

ok, what do you think about the parking system that I recommend.
 

nothing, because there is nothing to think about as you have proposed nothing.
 

You could use 2) 3) and 4) by making a system that it allows you to control the speed of a motor, diplay the speed using an lcd and also diplay the voltage that the motor requires at some speed usin an A/D converter.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top