Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Generation carrier frequency in the range of 20KHz-500KHz

Status
Not open for further replies.
R

rajasekhar.rk

Newbie level 3
Joined
Mar 4, 2010
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
INDIA
Activity points
1,296
Hi,

I would like to generate a carrier frequency in the range of 20KHz - 500KHz in steps of 0.5KHz means that it should be programmable in such a way that we can choose any desired frequency in between the range. for example 20KHz/20.5KHz/21KHz/21.5KHz... 498KHz/498.5KHz/499KHz/499.5KHz/500KHz.
Looking forward for your valuable suggestions.
Thanks in advance.

Regards,
Rajasekhar
 

Re: Generation carrier frequency in the range of 20KHz-500KH

Can Use PLL to generate different frequency.

IF the answer is not clear means give more details about your specs
 

Re: Generation carrier frequency in the range of 20KHz-500KH

Hi kalaiyarasan,

By using PLL we can generate frequencies but not of sinosidal. I need a sine wave carrier to be generated in verilog in the specified range.
Thanks in advance.

Regards,
Rajasekhar
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top