Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Ideal Switch using Veriloga

Status
Not open for further replies.
U

urn

Newbie level 6
Joined
Dec 4, 2009
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
USA
Activity points
1,363
Hi,

I want to implement an ideal switch using veriloga code.

Can any one help me out with this issue.

Thanks in Advance,
 

Maybe you can create a voltage controlled resistor as a switch, when switch-on, set the resistance = 0 , when switch-off, set the resistance = a large number, see, 1e15. In fact, the resistor just is the turn-on and turn-off resistance of the switch.
 

Hi,

Code: 
`include "disciplines.vams"

module relay (p, n, ps, ns);
    parameter real thresh=0;	// threshold (V)
    output p, n;
    input ps, ns;
    electrical p, n, ps, ns;

    analog begin
	@(cross( V(ps,ns) - thresh, 0 ))
		;
	if (V(ps,ns) > thresh)
		V(p,n) <+ 0;
	else
		I(p,n) <+ 0;
    end
endmodule

Taken from "The Designer's Guide to Verilog-AMS" by Kundert & Zinke.
Chapter 3, Listing 17.

You can find this example (and a lot more) here: https://www.designers-guide.org/Books/dg-vams/
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top