Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] inverted microstrip antenna simulation in MWO

Status
Not open for further replies.
Z

zoltan777

Newbie level 2
Joined
Mar 19, 2010
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,302
Hello everyone,

I have recently started in playing with inverted microstrip antenna simulations in MWO with the following details:

substrate: FR4
resonant frequency: 2.4GHz
substrate height: 1.6mm

I am very unsure as to how to set up the simulations and the layout of the inverted microstrip antenna in MWO...

can someone please show me how to set up the simulation of inverted microstrip antenna properly in MWO?

Any notes on the inverted microstrip antenna will be much appreciated.

thank you for reading or helping..
 

Hello zoltan777,


I see it is very easy to setup this just create em structure with tw dielectric layers
stack up & define FR4 & Air then bottom boundary condition as Perfect conductor (Ground) Then Draw the Microstrip Antenna structure....

It is very similar to suspended Microstrip structure setup...

Attach your MWO file (*.emp) with dimension I will help you in setting up...
& the corresponding paper / aricle you are using to impliment...


---manju---
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top