tapan banerjee
Newbie level 1
I have a remote controlled one celling fan speed controlled + one light on/off circuit. The circuit is consist with one 8 pin IC, one optocuplor, one relay, one BT 134 and one 547 transistor, and few resistance and capacito. It is very simple circuit without using microcontroller, so I want to make this circuit which will be cheap for me and my frieds. But there is a problem with the circuit that is the IC number is erase from the Parts, So, I request that if any one able to get some idea of the IC is possible. PIN 1-is supply voltage(+), PIN 2- to Sensor, PIN 3 & 4-Triggering (to two micro switch), PIN 5-Output Pulse, PIN 6-Output DC, PIN 7-Relay & middle leg of BT-134, PIN 8-GND.
The above is something little about the circuit IC, is it possible to identify the IC number from the above Pin description? if possible, please infromed me.
TAPAN
The above is something little about the circuit IC, is it possible to identify the IC number from the above Pin description? if possible, please infromed me.
TAPAN