Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Schematic Software for PLDs

Status
Not open for further replies.
S

samersalah

Junior Member level 2
Joined
Sep 19, 2002
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
106
Hi all ,
Could any one suggest a good software that meets the following requirments :
1 - Shematic Capture for logic ICs ( 74HC138 , 74HC139 , 74HC574 ,.... )
, it then turns that schematic into file format that is directly
programmed into PLD.
2 - I am not restricted to any special PLD model.

All suggestions are welcome ,
 

Hi,

Protel
www.protel.com

Multisim
**broken link removed**

Xilinx webpack
**broken link removed**

There are many other CAD programs.

But i prefer that you use VHDL to do that.

Bye
 

You also use ProChip Designer V4.0 with Atmel CPLDs.

It supports Atmel's ATF15xx Family of CPLDs, with a choice of design entry in VDHL, Verilog, CUPL, or Schematic.

h**p://www.atmel.com/dyn/products/tools_card.asp?tool_id=2756
 

Your design maybe somewhat simple, so you can try ALTERA's maxplusII software. then you can use
ALTERA's quartusII. If you design with VHDL, i suggest use XILINX's ISE6.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top