Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

suggest best cheap programmer

Status
Not open for further replies.
M

mishra12

Advanced Member level 2
Joined
Feb 18, 2009
Messages
672
Helped
136
Reputation
272
Reaction score
122
Trophy points
1,323
Location
some where left alone
Activity points
4,915
hi frens
i am looking for programmer cheap and best for pic 16f72-1 sp .i want to build it myself pls suggest or provide circuit and software for the project.
pls pls pls
 

I think the most convenient low budget programmer is the PicKit2, that's what i use right now, you can find chinese knock-offs for less than the original. If you're looking for a homemade, dirt-cheap solution, I suggest the P16PRO /picall.
 

Try searching "pickit2 clone" you'll find ample info in Eda board...Cheers
 

I use PICKIT2 and ALL-11 PICKIT2 is faster
 

Pony prog uses the serial port. If its ok, its one of the good programmers.
 

santoshaxl said:
can i use pony prog
Click to expand...

Ya.. You can use ponyprog to program PIC16 controllers and Atmel's controllers.
But PicKit2 support in-circuit debugging and programming. Which is not possible in ponyprog. If you just want to program your PIC, use ponyprog. But I recommend you to use PicKit2 becoz its very powerful and is a USB programmer.


Good luck.
 

You can purchase a PICkit2 (clone) on a online shop. The original can be bought directly on the site of Microchip, or clones for example **broken link removed**.
 

Ref this link...
**broken link removed**
 

santoshaxl said:
where i can purchase PICKIT2 in Delhi?
Click to expand...
I can arrange to deliver a Pickit 2 clone in Delhi from one of my friend. This is the product i was refering to.
 

but currently i am in nepal ,i'll purchase after sixth semester (i'll be in Delhi)

Added after 1 minutes:

thanks for the link
mera kam ho gaya
santosh mishra
 

buy PICKit3 I don't think PICKit2 (the original stuff) is available, its better to invest in the latest tools.
 


I have both programmers too. But I can't use PicKit3 programmer with my compiler. I use mikroPascal Pro or microC Pro compilers for my codes. Because these compilers don't support PicKit3. But PicKit2 has personal software (on PC) and I use it for writing microcontrollers.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top