Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HELP!!!-hfss import problem

Status
Not open for further replies.
A

ablendos

Junior Member level 3
Joined
Jan 8, 2004
Messages
31
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
246
import problem maxwell

when i import stl file into hfss, i have poor accuracy in result.
Do anyone have trick to get good result ???

PS:My hardware is enough to get good result!!!!
Thx.....
 

hi,u can draw ur schematic using autocad (*.dxf) then use translator at maxwell panel to convert it to stl,what u mean by poor accuracy pls detail
 

Sorry!!!..
i use inventor6 to draw a stl file and import into HFSS to caculated in eigenmode. But the number of delta frequency always stay in 1000~5000. My hardware is ok. i have 1GHz cpu and 1G ram.....
can you have any good trick to get good result?????
Inventor6 can not export to be dxf file........
Thx
 

Hi ablendos

try to check the dimentions of the model that you import.
sometimes after import you get wrong dimentions.
or try SAT or STEP export import if you have it.

RGZ
 

Hi Plasma
THank you for your information, but i still can not import the sat file into HFSS 8.5. For step file, HFSS 8.5 say 'no license for this product'. what can I do???
thx.........
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top