Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to generate a 3D model from an imported DXF geometry?

Status
Not open for further replies.
N

neubi

Newbie level 3
Joined
Mar 25, 2010
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,303
hi,

i've drawn a 2D geometrie in autocad and imported this by DXF import to HFSS. i can see the correct object in HFSS!

Q: how do i generate a 3D model from the imported dxf geometrie?

br,
andy
 

Re: DXF import to HFSS

I think you should create a line and then select your geometry, select the line and then choose Draw-> Sweep along line..

You should get your 3D drawing. For more instruction, look at the help file for sweeping along the line.

Added after 1 hours 9 minutes:

I have a problem of my own. When I import the drawings from DXF files, I only get non-model objects. But when i try to assign a material to them, or to change the properties of the imported model, the menus are disabled. Anyone had the same problem?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top