Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[Need Help]TSMC 0.13um LV HSPICE model

Status
Not open for further replies.
D

dboy1221

Newbie level 4
Joined
Feb 12, 2010
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,316
Hi,

Anyone has the TSMC 0.13um Low Voltage (1V supply) modelfile for hspice?

I am still waiting for MOSIS' approval. And I really want to have the model to begin the design ASAP.

Thanks!

PS: My design requires the 1V or lower supply voltage. Considering what I can get as a student, the TSMC013LV seems to be the only choice.
 



Re: TSMC 0.13um LV HSPICE model

The PTM website can generate a custom-defined model by setting vth, rdsw, tox, etc.

Does anyone know what values should I use for the TSMC 013um Low-Voltage model?

I need the Leff, Rdsw, Vth and Tox. I really don't want to begin with other models then switch back to TSMC for fabrication. It's nightmare...

Thanks:)

erikl said:
dboy1221 said:
I am still waiting for MOSIS' approval. And I really want to have the model to begin the design ASAP.
Click to expand...
Until you receive the proper TSMC models, you could perhaps start with the IBM 130nm HSPICE level 49 models from MOSIS, or with the 130nm level 54 models from PTM.
Click to expand...
 

Re: TSMC 0.13um LV HSPICE model

dboy1221 said:
The PTM website can generate a custom-defined model by setting vth, rdsw, tox, etc.

Does anyone know what values should I use for the model?

I need the Leff, Rdsw, Vth and Tox. I really don't want to begin with other models then switch back to TSMC for fabrication. It's nightmare...
Click to expand...

Even if someone would give you the proper 4 parameter values for the TSMC 013um Low-Voltage process, you wouldn't get a fully matching PTM model. You'd have to resimulate with the TSMC models anyway.
 

Re: TSMC 0.13um LV HSPICE model

Got it. Thanks again!

erikl said:
dboy1221 said:
The PTM website can generate a custom-defined model by setting vth, rdsw, tox, etc.

Does anyone know what values should I use for the model?

I need the Leff, Rdsw, Vth and Tox. I really don't want to begin with other models then switch back to TSMC for fabrication. It's nightmare...
Click to expand...

Even if someone would give you the proper 4 parameter values for the TSMC 013um Low-Voltage process, you wouldn't get a fully matching PTM model. You'd have to resimulate with the TSMC models anyway.
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top