Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

power efficiency in an amplifier circuit

Status
Not open for further replies.
M

mmnr00

Junior Member level 1
Joined
Mar 8, 2010
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
sydney, australia
Activity points
1,391
hye guys,

I'm builiding an amplifier circuit using resistors and OPAMP(LM741). I already got everything about it, but I'm also asked to waste as little power as possible. Is there any solution for this. It seems like a very stupid question. I'm new to designing analog circuit.

Thanks in advance for any help.
 

If you want to save minimise power then don't use the LM741. If the problem is "don't waste power even with the LM741" then usually it will involve trying to use the largest resistor values possible while still making sure the circuit works.

Keith.
 

@mmnr00

Hey check out the below link, it might be helpful, it says something about DC power dissipation

**broken link removed**
 

@keith

I should use the LM741. It is the requirement. The purpose is not to make a fully power efficient circuit, but it only want to reduce the power consumption. Got any idea on how to do it? Thanks

@ebbeyromy

thanks!
 

As I said - keep resistor values high. If you want a gain of 10 you could use 10k & 1k - use 100k & 10k instead, for example.

Keith
 

keith1200rs said:
As I said - keep resistor values high. If you want a gain of 10 you could use 10k & 1k - use 100k & 10k instead, for example.

Keith
Click to expand...

sorry keith, I forgot to mention that the value of resistor that is allowed to use is 20 ohm
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top