Peter A
Newbie level 1
Hi all!
I'm programming 320x240 LCD on A8835P3N witch is EPSON S1D13305 eqv. using ZL3AVR with Atmega32. Programming in Bascom 1.11.9.5.
I need some help. I have a little program which should do the SETUP at the beginning and than show some letters on the screen. Everything seems to be OK but the screen does not work...
Maybe someone has an example that works so that I can check if everything is OK with my screen. It does not matter if it is in C or Asembler or Bascom (or so)...
Here is a link to my code **broken link removed**
And this is what man can observe at the end (pattern is different depending on chosen signs).
**broken link removed**
THANKS FOR YOUR HELP!
I'm programming 320x240 LCD on A8835P3N witch is EPSON S1D13305 eqv. using ZL3AVR with Atmega32. Programming in Bascom 1.11.9.5.
I need some help. I have a little program which should do the SETUP at the beginning and than show some letters on the screen. Everything seems to be OK but the screen does not work...
Maybe someone has an example that works so that I can check if everything is OK with my screen. It does not matter if it is in C or Asembler or Bascom (or so)...
Here is a link to my code **broken link removed**
And this is what man can observe at the end (pattern is different depending on chosen signs).
**broken link removed**
THANKS FOR YOUR HELP!