Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

DC to Ac 12.6VDC to ~12VAC

Status
Not open for further replies.

COS

Newbie level 2
Joined
Feb 19, 2010
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
CA
Activity points
1,308
This probably has been beat down before but all I was able to find is Low VDC to 120VAC. What I am looking for is a Low 12.6VDC to Low 12.6VAC BUT I need very high current to the tune of 40A+.
I found the following schematics...

**broken link removed**
And
http://www.i4at.org/lib2/inverter.htm

All I will be using is the first half up to the transformer so ideally the output will be 12.6VAC+. The output will go into a multistage Cockroft Walton Voltage Multipliers: **broken link removed**

Has anyone built either of the circuits I linked to? (not the multiplier, already built one of those)
Any better ideas for a better AC converter? It would be nice to get as close to a pure sine at 12.6VAC+ but I know the circuits above will probably give me a sawtooth.
Just remember, I need very high current.

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top