Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to make phase shift between element with microstrip line

Status
Not open for further replies.
abdoeng

abdoeng

Advanced Member level 2
Joined
Feb 22, 2004
Messages
647
Helped
76
Reputation
152
Reaction score
63
Trophy points
1,308
Activity points
3,810
phased array design -job -ieee -patent

hi i would like ask about design of quasi yagi phased array,how i make phase shift between element using microstrip line technique
regards
 

first you should define m-port (the number of port is m)
then for each port you define a waveport or lumped port excitation and then
from this root you can define phase shift between your port:
HFSS>Field>edit sources
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top