Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

security with grid dip meter method

Status
Not open for further replies.
P

psmeets

Junior Member level 1
Joined
Apr 25, 2001
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
52
grid dip meter schematic

Hi,

I want to build a security system which detects when an object is 'out of reach'. The range should be 1,5 - 2 meter.
What about the grid dip meter method? When the object (with the LC resonator inside) leaves the area, the electromagnetic field changes.

Does anybody have a schematic? I prefer to make the reader and the tag myself.

Patrick
 

grid dip meter

This method relies on inductive coupling. The range will be a few cm unless both coils are very large. By large I mean a diameter of at least half the distance you want to cover.

This may not meet your needs. If you can have a battery in the object things are better. You can receive a signal at frequency F and retransmit it at F/2 and get much more range with smaller coils.
 

grid dip

What kind of OBJECT .. a PERSON ?? or a thing

There is the Thermic RADIATION method is pretty good .. you can detect
temperature variations with thermopiles!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top