calibre view in cadence virtuoso design flow

Has anyone experienced the following problem?
I have ubuntu OS, and mentor calibre (2008 version), cadence IC610.
With Calibre PEX, I am able to extract "spectre" netlist without any problem. However, if I use calibreview for post layout simulation in cadence design flow (Analog Design Environment), the extracted calibre view (it is a schematic, chosen in PEX output option) has lots of shorts, it is useless.

Part of my netlist (cell.pex.netlist) looks like:

.....
mgc_rve_device_template "nmoscap" "PLUS" "MINUS"
mgc_rve_device_template "moscap_rf33_nw" "PLUS" "MINUS" "BULK"
mgc_rve_parasitic_template "c" "r" "l" "k" "h"

mgc_rve_cell_start "random_genf" "CLK" "ENF" "RNUM_OUTF" "VDD" "VSS"
mr_pi "nch" "dcell2/I13/MNM0" '( "dcell2/I13/MNM0_d" "dcell2/I13/MNM0_g" "dcell2/I13/MNM0_s" "dcell2/I13/MNM0_b") '( ("l" 6e-08) ("w" 1e-06) ("ad" 1.9e-13) ("as" 1.51667e-13) ("pd" 2.38e-06) ("ps" 1.52e-06) ("nrd" 0.19) ("nrs" 0.151667) ("sa" 1.9e-07) ("sb" 1.455e-06) ("scc" 8.55438e-05) ("sca" 4.5363) ("scb" 0.00284833) ) '(1.52 7.905)
mr_pi "nch" "dcell2/I17/MNM0" '( "dcell2/I17/MNM0_d" "dcell2/I17/MNM0_g" "dcell2/I17/MNM0_s" "dcell2/I17/MNM0_b") '( ("l" 4e-07) ("w" 2e-06) ("ad" 2e-13) ("as" 3.03333e-13) ("pd" 2.2e-06) ("ps" 3.04e-06) ("nrd" 0.05) ("nrs" 0.0758333) ("sa" 2.95475e-07) ("sb" 7.75e-07) ("scc" 4.27534e-05) ("sca" 2.3681) ("scb" 0.00133974) ) '(1.86 6.905)
mr_pi "nch" "dcell2/I17/MNM1" '( "dcell2/I17/MNM1_d" "dcell2/I17/MNM1_g" "dcell2/I17/MNM1_s" "dcell2/I17/MNM1_b") '( ("l" 4e-07) ("w" 2e-06) ("ad" 3.5e-13) ("as" 2e-13) ("pd" 4.35e-06) ("ps" 2.2e-06) ("nrd" 0.0875) ("nrs" 0.05) ("sa" 9.25163e-07) ("sb" 1.75e-07) ("scc" 4.27534e-05) ("sca" 2.08275) ("scb" 0.00133693) ) '(2.46 6.905)
mr_pi "nch" "dcell3/I17/MNM1" '( "dcell3/I17/MNM1_d" "dcell3/I17/MNM1_g" "dcell3/I17/MNM1_s" "dcell3/I17/MNM1_b") '( ("l" 4e-07) ("w" 2e-06) ("ad" 3.5e-13) ("as" 2e-13) ("pd" 4.35e-06) ("ps" 2.2e-06) ("nrd" 0.0875) ("nrs" 0.05) ("sa" 1.75e-07) ("sb" 9.25163e-07) ("scc" 4.27534e-05) ("sca" 1.96831) ("scb" 0.00133694) ) '(3.34 4.295)
mr_pi "nch" "dcell1/I17/MNM1" '( "dcell1/I17/MNM1_d" "dcell1/I17/MNM1_g" "dcell1/I17/MNM1_s" "dcell1/I17/MNM1_b") '( ("l" 4e-07) ("w" 2e-06) ("ad" 3.5e-13) ("as" 2e-13) ("pd" 4.35e-06) ("ps" 2.2e-06) ("nrd" 0.0875) ("nrs" 0.05) ("sa" 1.75e-07) ("sb" 9.25163e-07) ("scc" 4.27534e-05) ("sca" 1.95971) ("scb" 0.00133693) ) '(3.34 6.905)
....

I do not understand why all the extracted transistors start with mr_pi, does this cause the above problem?

Appreciate your response.

I too getting the same response

Can any one help me??


Thank you

RamesH