HOW TO START CADSTAR FOR PCB DESIGINING

Hi,
Can anyone tell me, how to learn to work on cadstar,as i dont know anything about
cadstar.Earlier i worked in eagle.now i wanted to design pcb in cadstar...please help me how to design pcb in cadstar...

THANKS IN ADVANCE..

Hi kingofece

First of all if you the one tool that there is great benefit of learning to another tool , so first of all explore all the tab button in the software and there is also some self teach given by Zuken at there help option, which is very helpful ,exploring option using help you can learn also remember learnign is process and it will take time

All the best

regards
Antarveena

As above, there is a folder called "Self Teach" in the installation, use that and the documentation as there are tutorial documents that will teach you the basics.

read them, do the operations show several times.
Practise each operation.

What you do not understand use the magic button "F1".
That brings up the help pages - use the search by putting in the exact term or name you are unsure about.

Ensure you understand the basics of the library, understand the schematic entry and get your schematic correct. then transfer to PCB, make board outline - move your components into place, go into the PREditor and add the tracks etc. (when in PREditor you cannot access the cadstar you were in).

If you have problems please be more specific what the problem is rather than just asking us to tell you everything.