Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

what is the meaning of magnetic wall, electric wall

Status
Not open for further replies.
S

sundarmeenakshi

Full Member level 3
Joined
Dec 12, 2006
Messages
188
Helped
19
Reputation
38
Reaction score
2
Trophy points
1,298
Activity points
2,258
what is the meaning of magnetic wall, electric wall in antenna deisgn
 

kspalla said:
Wall is an obstruction.
electric wall means no electricity will be passed
magnetic wall means no magnetic field will pass.
Click to expand...
how it is possible.E and H field propagate through free spacena?
 

This concept is used in Passive Microstrip circuit design mostly filter design, where you couple two resonators.
Electric wall means you insert a short circuit & magetic wall means there is open circuit..

If you study micristrip structure behaviour you will get this concept.
 
Abhishekabs said:
This concept is used in Passive Microstrip circuit design mostly filter design, where you couple two resonators.
Electric wall means you insert a short circuit & magetic wall means there is open circuit..

If you study micristrip structure behaviour you will get this concept.
Click to expand...
cna u give any referance book for this?
 

Microstrip filters for RF/microwave applications By Jia-Sheng Hong, M. J. Lancaster

Check all books on microstrip filters & resonators couplers for more reference.
 
Ok, this what I have understood, please tell me if I am wrong.
if you see transmission line terminology,
If your end is open then electic field that is voltage is maximum& for short voltage is zero, right?
so if you are using Open circuit then Electric field will dominate right?
Then it can be termed as magnetic wall.

I know I may be wrong but this was how I wam trying to convince myself.

Please let me know if there is other explanation..

Added after 11 minutes:

If there is a side couple filter & you want to couple two microstrip line by magetic field that is by inserting electric wall, what will you do?
 
I understand that we are not talking about plane symmetry like electric plane and magnetic plane.

Question is about wall. means complete blockage of filed either electric or magnetic.

Your justification is not convincing to me.

For Electric wall simple Perfect conductor is OK as tangential electric field is zero.

For magnetic we may need AMC structure to counter the magnetic filed. time varying magnetic filed can not be blocked by either conductor or dielectic materials.
 
hi there

well i my view electric wall means there is no tangential electric field but there can be electric field normal to that wall

similarly magnetic wall means there is no tangential magnetic field but there can be magnetic field normall to that wall

i hope this helps

regards
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top