Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

edge ports for a finite substrate microstrip

Status
Not open for further replies.
G

gamba007

Junior Member level 2
Joined
Oct 1, 2009
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Johannesburg
Activity points
1,442
Edge ports in FEKO

Does anyone know how to define edge ports for a finite substrate microstrip fed patch antenna.? Anyone who has tried it would know that port edges have to share faces and then there is the negative and positive face story to complicate matters.


THe FEKO guidetries to explain but there is no example to show how it's done. Microstrip ports won't work for a finite substrate as per FEKO rules. If you have a cfx file with succesful simulations said example I would really appreciate it. Am using version 5.5 2009 release.
 

Have you found a solution to your problem, I am having problems with the same thing, if you have could you post a cadfeko model that has any microstrip on a finite substrate with a (microstrip)port, that can actually run feko.
 

hi gamba007,

í´m having the same proble about the feed in finite subtrates. Could you send me your example please? my email is jmga9@hotmail.com!

Best regards,

jmga9
 

Request a login from FEKO and go to their Help Centre. It is explained clearly there.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top