Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

USB PIC Programmer Schematic Needed

Status
Not open for further replies.
F

faisal_m786

Newbie level 5
Joined
Feb 22, 2009
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,339
I need a schematic (with its software) for a tested USB PIC programmer. I do have serial controlled programmers but they dont work with my laptop :cry: I request you to reply ASAP

Thanks :idea:
 

Hi,

Just search this forum for several different designs - the attached Pickit2 Lite being one of the best and easiest to build. ( you do not need the ferrite bead )
All the software is free to download from Microchip, you will need to program the pic18f2550 from your existing programmer.

Note that a few Laptop USB powered programmers can give problems because the laptops usb port cannot deliver adequate power, a powered usb hub usually cures that problem.
 

You can also try GTP USB programmer
 

A cheap option is to buy a usb to serial port converter .These are vey cheap now and the latest ones do not need a driver installed. Plug and play
 

USB CIRCUITS ARE AVALABLE AT ATMEL SITES
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top