Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Trying to identify a SMD fet.. need some helpful hints.

Status
Not open for further replies.

jaydag71

Newbie level 6
Joined
Feb 25, 2006
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,459
I am trying to identify a FET or perhaps transistor that is used in the Eflite Blade mcx 5-in-1 controller. I fried mine the other day and want to see about finding a replacement set for future use and possibly to repair the one I damaged,, thouh I suspect it is useless as the pcb is fried and a trace lifted also...;) all by itself!

This part is giving me a headache to find in conventional searches and common smd parts lists,, but am hoping one of the board gurus will have a more complete database or listing that they are keeping stashed away for just such refs?

This part is in sot-23 package I believe with a code as follows: ADUE16 ,, the AD are underlined, the U has a dot above, and the number 16 is running vertical and small beside the E.

As mentioned, I have had no luck searching for this code! The 5-in-1 is a rf receiver, mixer, gyro, etc all on one tiny pcb. The thing runs off single cell lipo and has a low voltage cut-off. The motors these fets are running are not much larger than pager motors- they are small, likely types used in regular small servos perhaps- anyways I am wondering if I cannot find the exact part then maybe finding some similar ones based on what power specs I can manage to find out?

Any help much appreciated! I hope I posted in right area!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top