Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help me anyone? please, if you have alredy made

Status
Not open for further replies.
N

ninel421

Newbie level 3
Joined
Sep 12, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,301
hy all, i'm new here, i dont know c or assembler, but if i have the code, i could write in my mcu and...the toy is done... So, i need a code or already compiled for sending AT commands to mobile phone when i put one pin at the ground. I sow many exaplmes here, but nothing alredy done for what i need... also, i need tu tell me what mcu and what phone i must use.. Thank you very much.
 

I think that you need is very simple, but will not find exactly how you need. You need modify a sample code to do this, and at this point a knowledge in c language is necessary.
 

Try the PIC16F84A and a Nokia 6610 mobile phone. These are the simplest devices you can ever find.
The Nokia 6610 has a serial cable that can be connected to the PC serial port.
You will cut the cable and connect the phone to the microcontroller directly.

Hope this helps.
 

    N

    ninel421

    Points: 2
    Helpful Answer Positive Rating
i understand but i need that code.. anybody who can help me? plss?
 

i am doing the same project. but mine is kinda complicated abit as

i am using Hi-Tech c language and using PIC16f877a

i am using sony erriscon T630 model.

first you would need to know what is AT command then u need to fidn sony erricson cable DRS-11..it is kinda hard to find

and u would need a MAX232 circuit as a voltage convertor/regulator as the cable and the PIC doesn't have the same voltage.

if u dun mind u can Pm me and tell me what u got and we can do this project together
 

yes, is a bit more complicated, but i saw many projects without max converter. now i have a sony ericcson 628 and a1018. a understant thats working without pic without max... am i right?
 

Check this topic. I think you will find everything you need there.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top