eirp
Advanced Member level 1
- Joined
- Dec 11, 2001
- Messages
- 466
- Helped
- 29
- Reputation
- 56
- Reaction score
- 19
- Trophy points
- 1,298
- Location
- Phase center
- Activity points
- 5,138
Hi all!
I'm just curious if it's possible to disable the farfield approximation in farfield display (I know this sentence is a bit misleading
I mean the line
Approximation = enabled (kR >> 1)
I've tried to set the reference distance in "Plot mode" but nothing..
Help says:
Reference distance: Set the radius of the virtual sphere for which the farfield is calculated. Available for plot modes e-field / h-field and power pattern.
if I change distance nothing is done with the pattern, only the magnitude is changed.
Please see also the "Farfield View" section in HTML help and look at the table at bottom -> for Radial and Radial phase there's farfield approximation off!!!
Thanks for any clue!!
regards,
eirp
I'm just curious if it's possible to disable the farfield approximation in farfield display (I know this sentence is a bit misleading
I mean the line
Approximation = enabled (kR >> 1)
I've tried to set the reference distance in "Plot mode" but nothing..
Help says:
Reference distance: Set the radius of the virtual sphere for which the farfield is calculated. Available for plot modes e-field / h-field and power pattern.
if I change distance nothing is done with the pattern, only the magnitude is changed.
Please see also the "Farfield View" section in HTML help and look at the table at bottom -> for Radial and Radial phase there's farfield approximation off!!!
Thanks for any clue!!
regards,
eirp