Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Video and voice wireless transmitter

Status
Not open for further replies.

7rots51

Advanced Member level 4
Joined
May 17, 2002
Messages
1,183
Helped
25
Reputation
50
Reaction score
12
Trophy points
1,318
Activity points
9,636
Please send me links and comments on design of wireless video and audio transmitter and receiver (IC and modules).

How to design in an addressable form.
 

Try Polarisusa, tehy have lot of devices in this field.
 

Look this cheap devices:
h**p://w*w.allthings.com.au/Wireless/wireless%20video%20transmitter%20sender%20menu.htm
 

try this link

h**p://www.nvlsi.no/Datablad/RF_overview_frame2.htm

think there u'll find something suitable

something else u can try; (depends on witch range u desire)

an video modulator ( everyone has an old broken VCR somewhere
in the howse, atleast, i dont throw sutch things away)

-mostly +5v
-audio input
-video input
-ground. (no need for more to modulate av)
the most modulators are for channel around 36 ( ~600 Mhz carrier)

problem is the low RP.

this u could amplify with a tv-cabel 'booster',
attached with a home-made quart-wave antenna
( output impedance 75 ohm )

greetz, gelly.
 

Please send digital wireless data ,video,audio transmitter and receiver links?
How to design ? ICs? RF section?


Thanks
 

look at VHF Communications magazine. The radioamateurs have built some packet radio equipment capable of 1Mbps bit rate which is the bandwidth you require. but thats only useful if its the source and drain of the link a PC computer.

rfmw
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top