Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

The difference between BC547 and BC337A transistors

Status
Not open for further replies.
D

dayal

Member level 3
Joined
Aug 26, 2007
Messages
54
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,629
Hi ,
i would like to know about the BC547 AND BC337A difference between two transistors, can i use it alternatively.

AWAITING REPLY.

thanks & regards
dayal
 

layout bc547

dayal said:
BC547 AND BC337A difference between two transistors, can i use it alternatively.
Click to expand...
Depends on your application, in most cases: yes. Pinout may be different.
BTW: Better ask such questions in this forum.
 

bc547 and bc 337

hi
bc 547 and bc337 are both general purpouse npn transistors with same ebc configuration but slightly difference in current 547 can handles up to 500 mamp current with a power dessipation up to 625 mw, while in the case of 337 it can handle up to 800 mamp with a power dessipation of 1.5 watt so it can be used in somewhat more power handling locations than 547.You may download datasheets for 547 and 337 transistors from the links given below
**broken link removed**
**broken link removed**
bye
 

bc547 more power

BC337 has considerably higher capacitances, thus it's not first choice in low current switching applications.
 

bc547 pinout

.. but BC337 can pass much more current. Anyways, in switchers, better to use FETs I would say.
 

bc337a

Hi,

thanks for ur kind information, i got exact answer.

Thanks & Regards
dayal
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top