Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

DRC erroe in cadence 5141 assuraany one has this problem???

Status
Not open for further replies.
S

superzz

Newbie level 3
Joined
Jul 21, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
xi'an
Activity points
1,300
There are two different Vdd in my schm. Avdd and Dvdd, but assura can't indentify them.it still report the error that the Nwell is not connected to the Vdd.
The rule of distance betweem AA to Nwell depend on whether Nwell connecct to Vdd.
anyone have this kind of problem???
 

i got the same problem ... for the circuit which is clean in caliber... but giving above errors in assura.. pls let me know if u find the solution......
 

Re: DRC erroe in cadence 5141 assuraany one has this problem

superzz said:
There are two different Vdd in my schm. Avdd and Dvdd, but assura can't indentify them.it still report the error that the Nwell is not connected to the Vdd.
Click to expand...
Declare these nodes as global (Avdd! & Dvdd!), then it should work.
See also .
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top