Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

an evaluation board for high-end network application

Status
Not open for further replies.

candy227

Newbie level 4
Joined
Apr 9, 2007
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,381
powerquicc iii eval board

MICETEK PowerQUICC III MPC8548E development platform
for Network Communication application

The MT8548E-N development system consists of MPC8548E processor card (MPC8548EPC) and Type-N carrier (PQCBN) and can be used for the development of network communication application. It will help developer quickly and simply set up the hardware platform where developer can promptly design and test the application software directly, and then reduce the design cycle and fasten time to market.

MT8548E-N:
Form Factor: 8.7 inch x 5.8 inch for Type-N carrier; 5.79 inch x 2.79 inch for MPC8548EPC
Processor: Freescale PowerQUICC III MPC8548E e500 core, speed up to 1.3GHz; Performance: 3065MIPS@1333 MHz
Memory: Single 256MB DDR2 with up to 16 MB flash
Interfaces: 4 x GbE connections, 3 x PCI slots, 1 x PCI-Express slot and 1 x RS-232 serial port
Debug: COP debug port
Software: U-Boot bootloader and Linux BSP available

For more information, please feel free to visit www.micetek.com/englishweb/index_eng.htm or contact us via international.sales@micetek.com.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top