Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Sell bluetooth serial com adapter

Status
Not open for further replies.
U

unaided

Member level 5
Joined
Mar 3, 2006
Messages
80
Helped
10
Reputation
20
Reaction score
1
Trophy points
1,288
Location
China
Activity points
1,652
8_1247028334.jpg

This adapter is used to replace serial communication port. For example, you can use this adapter to connect singlechip and PC by serial communication. And you can change some serial device to wireless. For example, you can change AVR com jtag to bluetooth jtag. When pair this adapter and PC, pin code is “0000”.

characteristic:

1.Adopt CSR BlueCore2

2.Support bluetooth 1.1, width is 10 meters

3.Can use jumper to set baud rate，support：

(1).4800

(2).9600

(3).19200

(4).38400

(5).57600

(6).115200

4.Adopt slave mode

5.Adopt two supply power:5V or 3.3V。Powr connect manner：Through JP2 to supply 5V or 3.3V power; Through DB9 to supply power，9 pin connect to 5V or 8 pin connect to 3.3V。

The more see: studyembedded.com Contact: jiangrt1982@gmail.com
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top