Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help needed - solution for error in nc-verilog

Status
Not open for further replies.
K

kevinthomasp

Newbie level 1
Joined
Sep 5, 2006
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,292
NC-Verliog Error

can u please suggest the solution of the below mentioned error in nc-verilog

ncelab: *W,FLFFNF: Compiled SDF file ($WORKDISK_LOC) not found, specified in SDF annotation command file ./options/sdf_command_file_NORM, line 7

I defined the WORKDISK_LOC variable as /home/project/sim/test

in ./options/sdf_command_file_NORM is a optin file of the ncverilog in the sdf is the input

COMPILED_SDF_FILE = "$WORKDISK_LOC/project.best_for_sim.sdf_compile",
SCOPE = test_project.__,
CONFIG_FILE = "./options/sdf_config.fj",
LOG_FILE = "sdf.log",
MTM_CONTROL = "TOOL_CONTROL",
SCALE_FACTORS = "1.0:1.0:1.0",
SCALE_TYPE = "FROM_MTM";
 

Re: NC-Verliog Error

Hi,
I can't resolve your problem but i has known that i can ask my question from you!
What is NC Verilog?
When i want to simulate any digital system described by Verilog or VHDL with OrCAD , this software call ncvhdl or nc verilog to simulate tje system but it cant!
is it possible to illustrate this issue?
Thanks.
 

Re: NC-Verliog Error

check setting for variable WORKDISK_LOC. Make sure that you are setting is correctly.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top