Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Using SPICE library in Advance Design System

Status
Not open for further replies.
W

winglj

Full Member level 4
Joined
Feb 21, 2005
Messages
195
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
3,063
Hi, everyone.

I just got some SPICE library from the vendors for a couple devices, such as general purpose BJT, power FET, zener diode. I am wondering how can I build the corresponding device in Agilent ADS, by importing these SPICE model in "lib" format? Thanks.
 

Hi wingli,

IN ADS, you go to File ___> import then push on Browse to link you file...

After that, the ADS wil make you automatically the schematic cicruit...


good luck

N
 

    W

    winglj

    Points: 2
    Helpful Answer Positive Rating
Using ADS (Main) goto file import -> Browse to the file -> click more options -> select Pspice and other appropriate options -> Hit OK.

When the design appears. In the design window goto file design parameters, then you can select a symbol to use and what library the device will appear in.

Cheers
 

    W

    winglj

    Points: 2
    Helpful Answer Positive Rating
sometimes it's more difficult, you need to modify the .lib file before importing with ADS.
It depends, ADS doesn t understand all .lib files immediately and return error, you need to know how .lib file is done to check the file and manual edit it
 

    W

    winglj

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top