Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

a dc to dc converter problem

Status
Not open for further replies.

wei9321

Member level 3
Joined
Feb 5, 2009
Messages
55
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,609
when the converter no load,
it's output voltage can not steady
but afther adding the mini load
the output voltage is stable
and the temperature rise,
the ouout voltage rise fast
why?
 

Could you write some others details about the converter e.g. topology (Buck, Boost, ...), feedback type (voltage mode, current mode, ...), functioning mode (CCM, DCM, ...), voltage on input/output and so on...
Do you've some circuit schematic?

Bye
 

no_load can be problematic, but it neednt be............

some of the old power ICs couldnt deal with it cuzz they always came on every cycle

but newer ones do skip cycle etc etc and can handle it easy

im surprised yo are having this problem
 

TekUT said:
Could you write some others details about the converter e.g. topology (Buck, Boost, ...), feedback type (voltage mode, current mode, ...), functioning mode (CCM, DCM, ...), voltage on input/output and so on...
Do you've some circuit schematic?

Bye
topology:flyback
feedback type:current mode
functioning mode:CCM
input:18-75v
output:5v/2A
 

Do you've also a schematic?

Bye
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top