Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Ddr2 address bus routing

Status
Not open for further replies.
ddr2 dimm routing

hi

we normally check these rules in the JEDEC 21C DIMM design standard, which is freely available but hard to find on www.jedec.org Actually it is not one document but lots of them for all DDR1/2/3 all DIMM types. normally they are called sec 4.20.x. Then you have to combine it with general controller to DIMM rules from your processor's hardware design guide.
check:

https://www.jedec.org/DOWNLOAD/pub21/HotDDR/Default.cfm

https://www.jedec.org/download/DesignFiles/default.cfm
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top