Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to define my own simViewList when extract cdl netlist?

Status
Not open for further replies.
K

kyleji

Newbie level 2
Joined
Sep 10, 2007
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,294
simviewlist

Hi everyone,

I extract hsim netlist using CIW=>EXPORT=>CDL.
I have some model view which name is "hsimmodel" for some big analog circuits.
I want to replace the "schematic" view with "hsimmodel" view when extract netlist.
I create .simrc & si.ini file in my run directory, and add the "simViewList" in these files.
But it doesn't work.
Does anybody can tell me how to implement the view replacement?

Thank you very much!
 

I do not really understand your intention. Can you provide a portion of the netlist you wanted? Basically when dealing with netlist export, you should modify the CDF of the component to meet your requirement.
 

Re: How to define my own simViewList when extract cdl netlis

tsinghua said:
I do not really understand your intention. Can you provide a portion of the netlist you wanted? Basically when dealing with netlist export, you should modify the CDF of the component to meet your requirement.
Click to expand...

Thanks for your reply.
From your ID, I'm thinking we graduated from the same universaty :)
The problem has already solved after I changed the parameter simviewlist to cdlsimviewlist.
Thanks again~
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top