Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

need help please... (ECG)

Status
Not open for further replies.

ranggaperdana_06114

Member level 3
Joined
May 12, 2008
Messages
64
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,586
ad624 ecg

hai bro i need help for this project.
i've find the design of ecg project from site :
https://www.picotech.com/applications/ecg.html
but i can't find the IC is AD624 but i found the AD620.by the way i don't know how to make it with AD620, can you tell me how to make this project with AD620 and what's diode that i must use cause i can't see the part number?
please help me...
tanx before...
 

please check this project

If you need any help please pm
 

try some 1n4148 but it should work without the diodes. They are for protection or better yet some SD101
 

how if i want to filter the signal to make them so clear what i must use it
 

Just use a simple low pass and then filter digital in microcontroller.
 

you need some clear signal..

the filter will extract noise and unwanted signal...
how this will work.. that is elementary questions,,

which need proper study...

HAPPY..:D
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top