Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

state files in cadence mot saved completely

Status
Not open for further replies.
F

fathi

Junior Member level 1
Joined
Oct 8, 2006
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,417
Hi,

Sometimes tha defined output parameters are not saved in ADE state files, or they are not loaded. defined variables and simulation and all other settings are loaded, but not the ouptut parameters. Does anybody have similar experience and how to avoid it or recover the output parameters?

Thanks
 

What do you understand as "output parameters"? The simulation output result values? Or variables to change the output values? You know you have to check the appropriate boxes before saving and loading?
 

By output parameters, I mean the functions that I define for post-processing the simulated waveforms, e.g., value(abs(dft(...)) 1G).

In the cases hat I mentioned, sometimes it does not let me select all the boxes, as a reslut it does not show the defined outputs (output functions/equations). But, in some cases, although I select the "outputs" box, it does not still show the outputs.
 

Re: state files in cadence not saved completely

Yes you're right: this seems to be a bug of the waveform program. However, if you selected to save your outputs, you should still be able to display the "direct" output and then do the post-processing via the calculator. I know this is only a work-around, but I don't know better :-(
 

Thanks for your reply. I actually, care more about the eduations, than the waveforms, as I have manu complicated equations..., but waveforms can be obtained by re-simulating.

Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top