Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

CADENCE ALLEGRO to PADS conversion

Status
Not open for further replies.

san2004

Member level 1
Joined
Jun 26, 2007
Messages
40
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,597
allegro to pads

Hello Frnds,

Can we convert anyway Cadence allegro board file ( .brd) to Mentor Graphics PADS format (.pcb) ????

Thanks in advance.

Byeeeeeeeee
 

cadence to pads

Look at this thread on the forum - this question has been asked before:


The short answer is no. You can use a tool like CAMCAD provided you can get the BRD file into the five ASCII files required by CAMCAD. You can hire a company that specializes in file conversions. Or you can export an ODB++ or Gerber set and reverse engineer from a CAM Editor like CAM350.

If you know someone with Alitum Designer, they can import the Allegro file. You can then import the Altium Designer file into PADS using the Mentor translator.
 

    san2004

    Points: 2
    Helpful Answer Positive Rating
pads allegro

Thanks dear !!!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top