Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

import a netlist from ISIS into Eagle ?

Status
Not open for further replies.
V

Van der Waals

Member level 2
Joined
Mar 11, 2008
Messages
45
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,580
understanding an isis netlist

Hi everyone,

I have made a circuit using ISIS 7.1 and now I would like to design the Circuit PCB with Eagle Cadsoft (I have the 4.01 version), I found in ISIS that it is possible to compile the netlist in different formats (Multiwire,spice,tango,SDF,...), so, which one should I chose ? and how can I import it into Eagle and start the designing ?

thanks in advance.
 

eagle import netlist

I think the MULTIWIRE format is the one used by EAGLE PCB - needs to be exported in physical netlist mode.

Note that you will have to manually assign EAGLE footprints to ISIS components either in EAGLE if supported or in a text editor prior to netlist load if not.


Iain.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top