Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need program for making intel HEX files

Status
Not open for further replies.
mrcube_ns

mrcube_ns

Advanced Member level 1
Joined
Apr 10, 2002
Messages
452
Helped
48
Reputation
96
Reaction score
34
Trophy points
1,308
Location
Europe
Activity points
3,813
I use AEC programmer software with AT89S8252.

I need to make intel8 HEX file for programming eeprom on mcu.

Is there any program for making HEX after I wrote something like this:
on address 0x234 put byte 0x12 and so on...
So after that program make HEX?

Tnx in advance.


Mr.Cube
 

Can you eleborate further? you mean start the program at memeory address 0234h?
 

hi
here you will find detail on hex format

www.cse.unsw.edu.au/~pleb/data_sheets/Hexfrmt.pdf
www.intel.com/design/zapcode/Intel_HEX_32_Format.doc

if you mean binary to hex conversion here is an example of this utility

**broken link removed**

Try a search by "binhex" or "bintohex" or "bin2hex" in a search engine.

If you have a software for a eprom programmer (or with winhex) you may write in binary in the dump area and than save the file .bin to convert in hex.

Of course you can find also many hex to bin utilityes.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top