Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

what is voltage peak to peak differential?

Status
Not open for further replies.

Mahyar_AMS

Newbie level 5
Joined
Sep 21, 2008
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,355
differential peak to peak

I want to know the amplitude of a single sine wave which would corresponding to a 0.5 Vppd? It would be 0.5 or 0.25?

Thanks
Mahyar
 

differential peak to peak voltage

Amplitude usually refers to 0 to peak value, in your case 0.25
You can find out more on Wikipedia.
 

voltage peak to peak

Vpp = 2 Vp

Vppd = 2 Vpd = 2 Vpp

so i think your Vp is 0.125V, Vpd is 0.25V
 

differential voltage vs peak to peak

Even in your answer somethings are in contrast you said 0.125 Vp = 0.25Vpp on the other hand 2Vpp=2Vp :)
Actualy I found the answer and that is 0.5Vppd corresponds to an amplitude of a 0.25 for a sine wave that means Vppd = Vpp when you model a differential input with a single input.
Thanks for your messages
Mahyar
 

Re: differential voltage vs peak to peak

Even in your answer somethings are in contrast you said 0.125 Vp = 0.25Vpp on the other hand 2Vpp=2Vp :)
Actualy I found the answer and that is 0.5Vppd corresponds to an amplitude of a 0.25 for a sine wave that means Vppd = Vpp when you model a differential input with a single input.
Thanks for your messages
Mahyar

Stennor's answer is correct. You will have 0.125V for Vp. Rather 0.5 Vppd turns out to be 0.125sin(wt)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top