Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to use an unknown LCD screen from a laptop? (1024-768)

Status
Not open for further replies.
B

b0222405

Newbie level 4
Joined
Aug 18, 2006
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,319
I have a laptop lcd screen of a broken laptop but lcd screen is okey.

I've searched by using its serial number or part number . I couldn't find reliable information.

Can anybody help me how can i use screen as a desktop monitor or how can i send image on it.
 

Re: lcd (1024-768)

Find a driver card or rip out an old driver board from a damaged desktop LCD. Unsure would you need the correct LVDS cable. There also a french website or forum that shows how to design a simple driver board using Analog ADC and some other logic gates. You would have search for that in google. The other alternative design your own driver board based on Mstar, Genesis or Realtek LCD chipset.

Added after 15 minutes:

https://www.youritronics.com/laptop-lcd-display-to-vga-interface-project/
https://forums.afterdawn.com/thread_view.cfm/2/98801
http://digg.com/mods/Using_a_Laptop_LCD_with_a_VGA_Connection_(via_Make)


eziggurat said:
Find a driver card or rip out an old driver board from a damaged desktop LCD. Unsure would you need the correct LVDS cable. There also a french website or forum that shows how to design a simple driver board using Analog ADC and some other logic gates. You would have search for that in google. The other alternative design your own driver board based on Mstar, Genesis or Realtek LCD chipset.
Click to expand...
 

    B

    b0222405

    Points: 2
    Helpful Answer Positive Rating
Re: lcd (1024-768)

Thanks for your answer

I dont have much information about driver card you mentioned. I have only lcd display. In the links you posted the think that i want but they used additional circuits can you give me some information about them.

best regards
 

Re: lcd (1024-768)

A driver board has VGA/DVI inputs and LVDS output and you find it inside a LCD desktop LCD screen. Inside the desktop LCD screen, you find an inverter and the driver boards. Your laptop LCD screen will have a LVDS input probably using yeonho connector as an interface. You will always need extra hardware to change your laptop LCD screen into a desktop screen. If your inverter stills work for your laptop, you should use it for your backlight. You might have to figure out how to switch it on and off.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top