Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

antenna parameter in hfss

Status
Not open for further replies.

ravi8331

Full Member level 4
Joined
Jul 4, 2008
Messages
237
Helped
33
Reputation
66
Reaction score
17
Trophy points
1,298
Location
India
Activity points
2,726
stutzman + hfss

hi
plz tell me how can i calculate the copolarazation and crosspolarization level of antenna,efficiency,3dB beamwidth etc. parameter of antenna in HFSS.
 

antenna parameters hfss

hi,

first set this
Fix Phi(Φ=0), Theta (θ) is varied from -180 degree to +180 degree
Fix Phi(Φ= 90), Theta (θ) is Varied from -180 degree to +180 degree
Fix Theta(θ=90) , Phi (Φ) is varied from -180 degree to +180 degree

then plot on a single graph selecting both E Phi(Φ=0) and Ethera (Φ= 90) for Co-polar and cross polar components.
from the Graph you can get 3dB bandwidth.

is this you wanted or any calculations?
 

antenna parameter

Make sure that you know the orientation of your antenna and the preferred polarization of the radiated signal.

Co and cross polarization is often referenced to this direction.

If you want a detailed discussion of this subject run down a copy of:
"Polarization in Electromagnetic Systems" - Warren L. Stutzman

HFSS has efficiency calculations in the post processor.
Read their online help files for details.

I have always calculated 3 dB beamwidths from cartesian pattern plots where I plotted angle on the horizontal axis and gain on the vertical axis. It is trivial to extract the beamwidth at what ever level you happen to desire. Think of this as an un-wound polar plot.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top