Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need LCD command list for KS0108

Status
Not open for further replies.
hkBattousai

hkBattousai

Advanced Member level 4
Joined
Jun 16, 2007
Messages
118
Helped
5
Reputation
10
Reaction score
1
Trophy points
1,298
Location
Turkey
Activity points
2,182
ks108 instruction set

I have been googling for an hour and still couldn't find anything except for lots of electrical specification sheets and a sample C code for a smiliar controller.

If you worked with this KS0108 LCD controller before, or you just have the command-list for it, please share it with me.

I will appreciate any help you offer.

Controller : KS0107 or KS0108
LCD : WG12864B
 

ks0108 command

I have found some instruction set for this microcontroller :

**broken link removed**

**broken link removed**

I understood some basics (status read, data read, data write, etc...) with these instruction set. But what I didn't understand is the X and Y addressing matter. It didn't make any sense in my mind how these addresses locate pixels on the LCD screen.

Is there anybody who can explain me how to use these X and Y addresses to put a single pixel on the LCD screen?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top